For rug exporters
Water repellency without PFAS.
Your buyers want water- and stain-repellent rugs without fluorinated chemistry. Nanoman® Fabric + Textile is a water-based nanocoating your team sprays on in-house, before each rug is rolled and packed.

Why exporters are switching
Your buyers are moving off PFAS. Your finish should too.
Brands in Europe and North America are taking PFAS, the "forever chemicals" behind most older water-repellent finishes, out of their supply chains. The EU and several US states are restricting them in textiles, and buyers now ask suppliers to confirm their finishes are fluorine-free.
Fabric + Textile gives rugs and carpets water and stain repellency from a silicon-dioxide-based nanocoating instead, with no change to colour, handle or breathability.
- Fluorine-free chemistryWater-based, PFAS-free formulation
- Proven repellencyTop rating of 100 in the IS 390 spray test: no sticking or wetting of the surface
- Tested against stains15 everyday stains on a treated carpet, most wiped away without a mark
- Invisible on the rugColour, handle and pile stay as they were
- Works across rug fibresWool, silk, viscose, cotton, polyester and blends
- Applied on your own lineNo outside processing: spray, brush in, dry, pack
Stain-resistance test
Spills wipe off. Even a day later.
A cream viscose carpet treated with Fabric + Textile was spotted with 15 everyday stains, from cola and wine to motor oil and shoe polish. Each was cleaned straight away and again after 24 hours, and graded on the AATCC Gray Scale, where 5 means no visible stain.
Viscose marks easily, which makes it a demanding fibre to test on.
- StainStraight awayAfter 24 hours
- Cola55
- Grape jam55
- Motor oil55
- Fruit juice55
- Soil55
- Shoe polish55
- Wine55
- Ketchup55
- Tea (hot herbal)3.55
- Coffee4.54
- Lipstick54
- Betadine4.54.5
- Permanent ink52.5
- Mustard51.5
- Cherry drink mix41.5
AATCC Gray Scale, 1 to 5 (5 = no visible stain). Sample: white/cream viscose carpet.
How it fits your line
Four steps on one spray line
All your finishing room needs is an HVLP spray gun, deionised water and a soft brush. One coat does the job.
Dilute
Mix 10 L of concentrate with 250 L of deionised water to make 260 L of ready-to-use coating.
Spray
Spray from about 15 cm with an HVLP gun until the surface is evenly damp. One coat is enough, rugs and carpets included.
Brush in
Work the coating into the pile or weave with a soft brush so it reaches the fibres evenly.
Dry and pack
Touch-dry in 1 to 2 hours. Allow 24 hours for full performance before rolling and packing.
Cost calculator
What it costs per rug
Enter a typical rug size and how many you ship a month. Figures use the ready-to-use price of ₹610 a litre and coverage of 60 to 80 sq ft per litre, one coat with an HVLP gun.
Length × width, e.g. 8 × 5 ft or 9 × 12 ft.
Coating cost per rug
–
+ GST, ready-to-use coating only
A guide only: coverage varies with pile height, fibre and construction. Concentrate is ₹15,840 per litre + GST in 10 L cans; ask for a quote on 50 L or more.
For your buyers
Documents your buyers ask for
The test results and data sheets your buyer's chemical and quality teams usually ask for. Fill in the short form below and we will send the full set straight back to you.
Request the documents
Tell us a little about your rugs and we will email the full set, usually within one business day.
Want a trial instead? Ask about a trial
Questions exporters ask
Before you switch
Does it change the look or feel of the rug?
No. The treatment is invisible. The fibres keep their original colour, handle and breathability.
Which rugs does it work on?
Rugs in wool, silk, viscose, cotton, polyester and other synthetics, and blends. Tell us the fibre and construction (hand-knotted, tufted, flatweave) and we will suggest a starting method for your line.
How long does the treatment last?
It lasts longest on items that are rarely washed. As a guide, 1 to 2 years on furniture and carpets in normal use, depending on wear and cleaning.
What documents can you give our buyer?
A PFAS-free statement, the IS 390 spray test result, the stain-resistance test results, technical and safety data sheets, the application method, and supply details including the HS code. Email us and we will send them.
Do we need special equipment?
An HVLP spray gun, deionised water and a soft brush. One even coat from the HVLP gun is enough, rugs and carpets included.
How is it supplied?
As a concentrate in 10 L cans, which make 260 L of ready-to-use coating each. For 50 L or more, ask us for a bulk quote.
Start with a trial on your own rugs.
Tell us what rugs you make and how many you ship, and we will send the documents and a quote.
