Antimicrobial 365
Surface Protection
How does
Nanoman Antimicrobial 365 work?
Utilising our experience in being able to achieve nano particle adhesion across a range of surfaces, we have developed a different type of nano particle that “ruptures” a bacteria or germs protective membrane, rendering it ineffective and unable to cause an infection.
It does this in two ways. The shape of the nano particle can best be described as a “Pin”. These nano pins can only be seen under an electron microscope but they form a very dense and durable killing field protecting the entire surface.
When bacteria or germs find their way onto the protected surface they are ruptured and rendered ineffective.
The lower mid section shows the positively charged nitrogen molecules that attracts in the negatively charged bacteria and germ cell.
The second component to these nano pins is that they are positively charged and draw in and attract the negatively charged bacteria and germs. They continue to puncture these contaminants, destroying them, rendering the surface 99.9% free of micro-organisms.
The surface coating continually delivers this “mechanical” kill of bacteria and germs by rupturing their protective layers as opposed to a toxic kill utilised by disinfectants.
Bacteria full of amino acids and proteins.
Ruptured bacteria made inert by our nano pin.
The benefits of Nanoman
Antimicrobial 365 Protection
Nanoman Antimicrobial 365 coatings are not strictly a disinfectant, although they kill bacteria and germs from surfaces. They are “surface modifiers” with the ability to continually kill bacteria and germs from any surface to which they are applied. The speed/rate of its efficacy is different to that of a standard disinfectant. The Antimicrobial 365 coating and a disinfectant perform very differently to each other.
Unlike disinfectants that provide an almost immediate one off kill of germs and bacteria (at the time of application) Nanoman Antibacterial coatings provide an ongoing “killing” ability. The effect is not instantaneous but occurs over time. The antibacterial killing field is effective almost immediately. Within the first 30 minutes of contact it will kill up to 99% of bacteria that it make contact with. It then continues to kill any remaining bacteria (up to 99.9%) within 3 hours. Any remaining bacteria, if any, are killed after 24 hours post contact. In other words, the surface is continually killing the bacteria and germs that have been deposited on the surface to a point that can be likened to disinfecting agent.
Disinfectant provides a one off kill of bacteria and germs.
Antibacterial Killing field – Continuous kill of bacteria and germs.
The most significant difference between Nanoman Antimicrobial 365 and a disinfectant is that it works continuously; unlike a disinfectant that works only once killing micro-organisms the time of its application only. It has no residual benefit or effect.
And it’s an important difference. Disinfectants are effective in destroying bacteria and germs on surfaces, but they only work once. Bacteria and germs can be back on a surface almost immediately after disinfection if it physically touched by an infected carrier or aerosol. This transmission from host to surface, and surface to host (fomite transmission) can happen very rapidly, multiplying the risk of further infections.
It is fast becoming a very costly exercise to continually disinfect every surface in order to protect people and minimise the spread of infection. Normal cleaning regimes have been thrown out the window and the economic and social impact has been enormous. Nanoman Antimicrobial 365 can redress this imbalance and allow a return to normal cleaning protocols. It is real and effective step change in the way to keep surfaces clean and free of infection causing bacteria and germs
Nanoman Antimicrobial 365 Features
- Destroys bacteria and germs preventing their spread.
- Provides a mechanical kill not a toxic kill.
- Prevents the spread of pathogens.
- Single application provides continuous 24/7, long lasting protection.
- Non toxic and VOC free.
- Applicable for use on all surfaces including metal, plastic, timber, stone, fabric and textiles.
- Completely Invisible.
- For use indoors and outdoors.
- UV stable and abrasion resistant.
- High coverage rate.
- Allows for the resumption of normal clean regimes.
- Cost effective.
Applications
Nanoman Antimicrobial 365 has an almost unlimited number of uses. Any surface is capable of hosting and sustaining germs and bacteria. Nanoman Antibacterial 365 provides a defence against the spread of these germs and bacteria from surfaces by continually killing them which greatly reduces the chance of infection transmission.
Public Buildings
- Government Buildings
- Council Buildings
- Public Housing
- Public Areas, Stairs, Lifts, Foyers
- Shopping Centres, Tourist attractions
Offices
- Workplaces
- Meeting Rooms
- Open / Shared Areas
- Desks, Computer, Monitors
Transport
- Trains, Trams, Buses, Ferries, Aeroplanes
- Terminals / Transport Hubs / Stations
- Taxis, Hire Cars
- Private Vehicles
- Delivery Vehicles
Education
- Schools, Community Learning Spaces
- Universities, TAFE
- Kindergartens, Child Care
- Places of Worship
Social
- Restaurants , Cafes, Pubs,Clubs
- Gyms,
- Cinemas , Theatres
- Sporting facilities, Stadiums
Business and Industries
- Construction Sites
- Factories, Distribution Centres
- Aged Care
- Shipping & Cruiselines
- Hotels and Motels
Further Information
It is important to recognise that Nanoman Antimicrobial 365 surface coating should not be considered as a total replacement for disinfectants. Disinfectants will continue to be necessary and be the primary immediate sanitiser for surfaces. Nanoman Antimicrobial 365 does not eliminate the need for good hygiene nor replace other measures like physical distancing or the use of PPE. Nanoman Antimicrobial 365 is but another tool in the fight against the spread of pathogens from surface to surface and potential infection of humans.
SDS / TDS download links.
Nanoman Antimicrobial 365 is supplied to DIY consumer users and trade users.
