Rug & carpet coating

Rug coating that keeps spills on the surface.

Nanoman® Fabric + Textile is a clear, PFAS-free nanocoating for rugs and carpets. Water, tea and wine bead up on the pile instead of soaking in, so you blot them away before they stain. The rug looks and feels exactly as it did.

Close-up of a colourful hand-knotted rug protected with Nanoman rug coating
11 of 15everyday stains wiped off with no mark in our stain test
100Top water-repellency rating in the IS 390 spray test
PFAS-freeWater-based, no fluorinated chemistry
InvisibleNo change to colour, softness or breathability

What a rug coating does

A protective layer on every fibre, too thin to see.

Rug fibres are thirsty. Wool, viscose and cotton pull a spill deep into the pile within seconds, and that is what turns a spill into a stain. A rug coating changes the surface of each fibre so liquids sit on top as droplets instead.

Fabric + Textile does this with a silicon-dioxide-based nanocoating rather than the fluorinated chemistry used in many older carpet protectors. It bonds to the fibres as it dries and leaves nothing on the surface you can see or feel.

Looking for an anti-slip coating for the back of a rug? That is a different product. A protective rug coating goes on the top of the rug, on the pile.

Water beading on fabric treated with Nanoman rug coating
Water beads up on treated fibres instead of soaking in.

Stain-resistance test

Tested with 15 everyday stains.

11 of 15left no visible mark when blotted straight away
14 of 15rated 4 or better when blotted straight away
9 of 15still left no visible mark after 24 hours on the carpet

A cream viscose carpet treated with Fabric + Textile was spotted with 15 stains, from cola and wine to motor oil and shoe polish. One set was blotted straight away; the other was left for 24 hours, then cleaned with a standard spot remover. Each was graded on the AATCC Gray Scale, where 5 means no visible stain.

Viscose is one of the hardest rug fibres to keep clean, which makes it a demanding test.

  • StainStraight awayAfter 24 hours
  • Cola55
  • Grape jam55
  • Motor oil55
  • Fruit juice55
  • Soil55
  • Shoe polish55
  • Wine55
  • Ketchup55
  • Tea (hot herbal)3.55
  • Coffee4.54
  • Lipstick54
  • Betadine4.54.5
  • Permanent ink52.5
  • Mustard51.5
  • Cherry drink mix41.5

AATCC Gray Scale, 1 to 5 (5 = no visible stain). Sample: cream viscose carpet.

How to coat a rug

At home, or on a finishing line

The same coating, applied two ways.

Your rug at home

For a rug or carpet you already own. All you need is a hand pressure sprayer and a soft brush.

  1. Vacuum the rug well so the pile is clean and dry.
  2. Spray evenly until the pile is damp, working in sections.
  3. Apply a second coat straight away, while the first is still wet.
  4. Brush it into the pile and let the rug dry for 4 to 6 hours before use.

Rug makers & exporters

For coating rugs before they are rolled and shipped. One even coat from an HVLP spray gun is enough, rugs and carpets included.

  • About ₹8–₹10 per sq ft treated, + GST.
  • Concentrate in 10 L cans; 1 : 25 with deionised water.
  • PFAS-free statement and test results for your buyers.
  • Fits your existing finishing room: spray, brush, dry, pack.

What you can coat

Works on the fibres rugs are made from

Hand-knotted, hand-tufted, flat-woven and machine-made rugs, and wall-to-wall carpet. On a valuable or antique piece, try a hidden corner first.

  • Wool
  • Silk
  • Viscose
  • Cotton
  • Polyester
  • Other synthetics
  • Blends
  • Durries & kilims
  • Wall-to-wall carpet

Questions

Rug coating questions

What is a rug coating?

A rug coating is a clear protective finish sprayed onto the pile of a rug or carpet. Nanoman Fabric + Textile is a water-based nanocoating that bonds to each fibre, so water and most spills bead up on the surface instead of soaking in. You blot them away before they can stain.

Is it the same as an anti-slip rug backing?

No. Anti-slip backings are rubbery coatings painted on the underside of a rug to stop it sliding. A protective rug coating goes on the top, on the pile, and is invisible. It keeps water and stains out of the fibres.

Is Nanoman rug coating PFAS-free?

Yes. Fabric + Textile is water-based and contains no PFAS or other fluorinated chemistry, the "forever chemicals" used in many older carpet protectors.

Will it change the colour or feel of my rug?

No. Once dry the coating cannot be seen or felt. The rug keeps its colour, softness and breathability.

Which rugs can I coat?

Wool, silk, viscose, cotton, polyester and other synthetics, and blends. It suits hand-knotted, hand-tufted, flat-woven and machine-made rugs as well as wall-to-wall carpet. On a valuable or antique piece, try it on a hidden corner first.

How well does it resist stains?

In a stain test on a treated cream viscose carpet, 11 of 15 everyday stains, including cola, wine, motor oil and shoe polish, left no visible mark when blotted straight away. 9 of 15 still left no mark after sitting for 24 hours. No coating makes a rug stain-proof, so blot spills as soon as you can.

How long does a rug coating last?

As a guide, 1 to 2 years on rugs and carpets in normal use. Heavy foot traffic and frequent deep wet cleaning wear it faster. A fresh coat restores full protection.

How do I apply it at home?

Vacuum the rug, then spray it evenly with a hand pressure sprayer until the pile is damp. Apply a second coat straight away, while the first is still wet. Brush it into the pile with a soft brush and let the rug dry for 4 to 6 hours before walking on it.

How do rug makers and exporters apply it?

On a finishing line, one even coat from an HVLP spray gun is enough, rugs and carpets included. Pieces are brushed, air-dried and packed. See the page for rug exporters for costs per rug and the documents buyers ask for.

How much does it cost?

For trade use it works out at about ₹8 to ₹10 per sq ft treated, plus GST. For home use, buy a ready-to-use pack from our shop.

Protect the rug before the next spill.

Order for your home, or tell us what you make and we will send a quote and the documents your buyers need.