Guides / Fabric Protection

PFAS-free carpet protector: what changed, and what to ask

For years, almost every carpet and rug protector worked the same way: a fluorinated finish that made fibres shed water and oil. That chemistry belongs to a family called PFAS, and it is now being phased out of carpets, rugs and textiles in several major markets. If you buy, sell or make rugs, here is what changed, what a PFAS-free carpet protector does instead, and what to ask before you choose one.

What PFAS are, and why they are leaving carpets

PFAS (per- and polyfluoroalkyl substances) are a large group of man-made chemicals with extremely strong carbon–fluorine bonds. That strength is what made them good at repelling water, oil and stains. It is also why they are called “forever chemicals”: they break down very slowly and build up in the environment.

Regulators have responded. Several US states, including New York, Colorado, Maine and New Hampshire, now restrict PFAS in carpets, rugs, textiles or fabric treatments, with more rules taking effect in 2026 and 2027. Others, such as Connecticut, require labelling. The European Union is working on a broad restriction covering thousands of PFAS. Large retailers and brands have moved even faster, writing PFAS-free requirements into their supplier terms.

For anyone in the rug trade, the practical result is simple: buyers increasingly ask, in writing, whether a finish contains PFAS.

How a PFAS-free carpet protector works

Fluorinated protectors are not the only way to make a fibre repel liquid. Nanoman® Fabric + Textile uses a water-based, silicon-dioxide-based nanocoating instead. As it dries it bonds to each fibre and forms a layer far too thin to see or feel. Water and most spills then sit on the surface as beads rather than soaking in.

On results, the questions that matter are the same ones you would ask of any rug coating:

  • Water repellency. Fabric + Textile achieves 100, the top rating, in the IS 390 spray test.
  • Stain resistance. On a treated cream viscose carpet, 11 of 15 everyday stains left no visible mark when blotted straight away, and 9 of 15 after sitting for 24 hours.
  • Look and feel. No change to colour, softness or breathability.

What to ask before you choose a protector

  1. Is it PFAS-free, and will the supplier say so in writing? A signed statement is what your buyer’s chemical team will want.
  2. What are the test results, and on what fibre? Ask for water-repellency and stain-test data, ideally on a fibre as demanding as yours.
  3. Does it change the rug? Colour, handle and breathability should stay as they were.
  4. How is it applied? Fabric + Textile goes on with one even coat from an HVLP spray gun on a finishing line, or two coats wet-on-wet with a hand pressure sprayer at home.
  5. How long does it last? As a guide, 1 to 2 years on rugs and carpets in normal use.

For homeowners

If you are protecting a rug at home, a PFAS-free protector does the same job you would expect from any carpet protector: it gives you time to blot a spill before it stains. Buy Fabric + Textile for your home.

For rug makers and exporters

If you finish rugs for overseas buyers, switching now avoids a scramble when a buyer’s PFAS deadline arrives. We supply the concentrate in 10 L cans, along with a PFAS-free statement, test results and an application method for your finishing room. Work out the cost per rug and request buyer documents.