
Images are for illustration purposes only. Actual product packaging delivered may differ.
Anti Graffiti PorousAnti-graffiti coating for brick, concrete and stone
Nanoman Anti Graffiti Porous is an advanced, long lasting one coat, non sacrificial, anti-graffiti coating specially formulated to protect surfaces from the permanent defacing by undesirable graffiti.
Nanotechnology formula
Non sacrificial
Long lasting
Easy one coat application
Key benefits
- Savings in time and cost to remove graffiti.
- Graffiti can be removed easily with a VOC free cleaner, leaving no residue.
- Non sacrificial - sustains multiple graffiti removals.
- Single coat application that's long lasting and durable.
- Reduction in the use of consumables and removers.
- No ongoing recoat and unsightly colour patches.
Show all 8 benefits
- No sophisticated cleaning equipment required.
- Long lasting protection - durable life of up to 10 years on vertical surfaces depending on the material, use and maintenance of the surface.
Ready to use onlySupplied ready to use, not as a concentrate, so there is nothing to dilute. Trade and bulk volumes available.
Overview
A non-sacrificial coating for porous masonry. Graffiti can be removed countless times without re-applying, and the wall becomes water-repellent, so everyday dirt washes off with the rain.
Where it is used
- Bridges and underpasses
- Boundary walls
- Public buildings
- Heritage brickwork
- Hoardings and fences
Invisible on the wall, and graffiti lifts off without damaging the surface.
Where to use it
Porous walls that get tagged again and again.
Anti-graffiti coating for brick, concrete and stone.
Brick and block
Bare brick, concrete block and render.
Natural and reconstituted stone
Cladding, columns and monuments.
Painted masonry
Previously painted walls (test adhesion first).
Bridges and underpasses
Large public surfaces that attract tagging.
Walls and fences
Boundary walls, hoardings and fences.
Public buildings
Schools, stations and civic buildings.
Heritage brickwork
Graffiti comes off without harming old brick.
Not suitable for
- Metal, glass or glossy paint: use Anti Graffiti Non Porous
- Damp substrates or concrete less than 28 days old
- Surfaces with existing sealers, silicone or wax
How to apply
Clean it, one coat, let it cure.
Prepare the surface
- Remove existing graffiti, dirt, efflorescence, laitance and release agents, then rinse.
- The surface must be completely dry. The coating cures with moisture from the air, not from the substrate.
- Apply at 5–30 °C and 30–80% relative humidity, with no rain for at least 5 hours.
Get it ready
Apply it
- 1Decant only what you will use in the next 30 minutes into a clean, dry container.
- 2Apply one even coat by brush, roller or airless sprayer, in a criss-cross pattern.
- 3Even out runs or high spots within 10 minutes.
- 4Apply one coat only, and never use tools that are damp with water.
- 5Clean tools promptly, before the coating cures.
- 6Touch dry in 1 hour, rain-safe after 5 hours, fully cured after 7 days.
Even out runs
within 10 minutes
Rain-safe
after 5 hours
Full cure
7 days
- Test a small hidden area first
- Full instructions and safety data in the data sheets
See Anti Graffiti Porous in action
Questions
About using Anti Graffiti Porous.
What surface materials can I use this on?
Nanoman AG (porous) can be used on brick, concrete, tile, sandstone, bluestone, timber and materials like compressed cement sheeting and modwood. We have a different type of AG coating for materials like steel, copper, corten, aluminium and plastic
Can this coating be applied to surfaces that have already been sealed?
No, Nanoman Anti Graffiti is a surface sealer and AG coating. It is engineered to bond with the natural porous substrate surface and may not do so properly if it has already been coated with another product.
Can I paint over top of Nanoman Anti Graffiti?
No, in most cases the coating will immediately reject any paint applied on top of it.
Can I apply Nanoman Anti Graffiti to painted surfaces?
Yes, being a clear coating, Nanoman AG is perfect for protecting murals and painted walls. The AG coating provides an effective barrier on top of the painted surface and graffiti can be removed easily without damaging the underlying artwork. The AG coating will actually help preserve the mural or painted surface from weather damage and environmental pollution.
Will Nanoman AG change the look of my wall?
When applied, Nanoman AG has a darkening effect on most substrates. This is more obvious on some materials that others. Initially this provides a wet, lacquered look, which on some materials like coloured bricks, sandstone, timber and painted surfaces, enhances the colour of the material slightly. On materials like grey concrete, cement sheeting and bluestone the colour change is more noticeable. The darkening effect will abate slightly over a period of about 8 weeks however on most materials it will remain as a permanent colour change. We recommend in some situations that you sample the coating first in an inconspicuous place so as to confirm that the colour change meets your visual requirements.
Is the coating a matt or gloss finish?
When first applied the coating has a definite gloss effect on most substrates. The effect is not as obvious on rough or textured surfaces. As the coating cures over a period of about 6-8 weeks, it hardens and looses some of this gloss effect.
Will the coating discolour, crack or peel off?
No, Nanoman AG is UV neutral and will not be affected by the sun or weather. Over a period of several weeks, the coating becomes intrinsic with the substrate material and is very hard to remove. It cannot discolour, crack or peel off at any stage although care needs to be taken when first applied and during it’s curing stage (ie 7 days).
How can I remove this coating if I want to paint/repaint the surface?
Nanoman AG is not easy to remove. It is designed as a 10 year barrier against graffiti. If it needs to be removed we recommend grinding it off. It will not be removed with chemical cleaners or acid.
What sort of coverage rate does this coating have?
We generally advise between 10 and 12 square metres per litre. This depends on the substrate material as some are more porous than others and also texture of the material, ie rough or smooth.
How do I apply this coating?
Please refer to the TDS for details about surface preparation and application. Some key points to note are as follows:
Do not apply to a wet/damp surface
Do not apply in wet conditions or where there is a likelihood of rain. The coating needs to remain dry for at least 4 hours post application.
Remove all dirt, dust and unwanted marks from the surface before applying.
Be careful working around other trades when applying. Dirt and sawdust will ruin the finish of the coating and is very hard to remove. Be careful when applying in windy conditions. We recommend the AG be applied in most cases at the end of the project.
Keep the lid on containers at all times and do not re-cycle used product back into the container. Use clean brushes and equipment at all times to avoid contamination and for ease of application.
In many cases, the AG coating will need to be thinned prior to application. This will usually be dependant on the outside air temperature and temperature at which the AG coating is stored. A higher temperature is better for applying the coating and will require less thinning. To thin we recommend using white spirits or mineral turps (do not use paint thinners). Stir the mixture slowly so as to avoid air bubbles. The AG solution can tolerate up to 30% thinning without loosing it’s efficacy. Stir occasionally to keep the solution as viscous as possible.
Apply one coat only. The coating will start to dry quite quickly so it is best to provide a good coverage the first time. Patches and rework should be done within 10 minutes and only where the coating is still wet.
Also in the range
All products →Talk to us about supply
Tell us the surface, the area and the volume you need.




