Glass + Ceramic

Images are for illustration purposes only. Actual product packaging delivered may differ.

Glass + CeramicHydrophobic nanocoating for glass and ceramics

Nanoman Glass + Ceramic is a clear hydrophobic nano glass coating for indoor and outdoor glass, ceramic and porcelain surfaces. Use it for shower screens, windows and other suitable surfaces where water repellency and easier cleaning matter.

  • Water repellent
  • PFAS-free
  • Long lasting
  • Easy to clean

Key benefits

  • Repels water and prevents the build-up of dirt and other contaminants.
  • Easy to apply.
  • Long lasting (up to 5 yrs. depending on use).
  • Suitable for both interior and exterior glass surfaces.
  • Car, bus and railway windscreens shed rain and road grime.
  • Perfect for bathrooms and glass shower screens
Show all 11 benefits
  • Protects against etching and surface degradation.
  • Minimises the effects of bore water and other highly mineralised water.
  • Reduces cleaning time.
  • Reduces the need to use chemical cleaners.
  • Invisible, UV stable and chemical resistant.

Supplied as a concentrateDiluted on site, so you ship and store less.

Overview

An invisible, UV-stable nanocoating that bonds to glass and glazed ceramics, so water, soap scum and limescale run off instead of building up. A quick wipe with a damp cloth keeps it clean.

20 Lof ready-to-use coating from one Part A + Part B set
18,000+sq ft covered by one set, at 8–12 ml/m²
Up to5 yrsof easy-clean protection, indoors and out

Where it pays back fastest

  • Shower screens
  • Windows and skylights
  • Car and train windscreens
  • Balustrades and pool fences
  • Glazed tiles and basins
  • Shopfronts and façades

It will not peel, flake, crack or discolour, and normal detergents do not harm it.

In-house lab tests

Built to stay water-repellent

We put Glass + Ceramic through abrasion, chemical and UV tests in our own lab, measuring the water contact angle on the coated glass each time. Above 90°, water beads up and rolls off.

10,000 wipes

Still beading strongly: 109° before, 94° to 97° after 10,000 machine wipes with a rubber squeegee, a microfibre cloth or a sponge.

24 hours

In alkaline, acidic and neutral cleaners, undiluted. The contact angle stayed at 105° to 107°.

250 hours

Of intense UV radiation. The contact angle went from 109° to 108°.

In-house tests on coated float glass. Contact angle measured with deionised water, ±3°. Results apply to the samples tested.

Buy direct from the manufacturer

Order Glass + Ceramic online

For façade and glazing contractors, applicators, facility managers, builders and architects. Business orders only, with a GSTIN. Free delivery across India.

Glass + Ceramic concentrate set

₹48,600 per set + 18% GST (HSN 38249990)

₹57,348 per set incl. GST

  • One set (Part A + Part B) makes 20 L of ready-to-use coating when diluted with IPA or ethanol
  • 20 L covers 18,000–20,000 sq ft of glass, glazed ceramic or porcelain
  • Including the IPA for dilution, the coating costs about ₹3 per sq ft
  • Free delivery across India, shipped direct from our plant
  • Pay in advance by UPI or bank transfer; GST invoice emailed on payment

Need a larger quantity? Email info@nilimanano.com for a bulk quote.

Where to use it

Glass and glazed surfaces, at home, on buildings and on the move.

Hydrophobic nanocoating for glass and ceramics.

Shower screens and mirrors

Soap scum and limescale rinse off instead of building up.

Windows and glass doors

Indoors and out, on new or existing glass.

Balustrades and pool fences

Water spots, salt and chlorine wipe away.

Glazed tiles

Wall and floor tiles in kitchens and bathrooms.

Basins, baths and toilets

Glazed sanitaryware stays easier to clean.

Shopfronts, façades and skylights

Large or hard-to-reach glazing that is costly to keep clean.

Car, bus and truck windscreens

Rain beads up and runs off, and dirt and bugs wipe away more easily.

Railway windscreens and windows

Locomotive windscreens and coach windows that face rain, dust and grime.

Not suitable for

  • Unglazed tiles, natural stone or grout: use Stone + Brick
  • Window tint film or coated low-E glass (test first)
  • Acrylic or polycarbonate
  • Glass already etched or heavily scaled, unless it has been restored first

Read the glass and ceramic coating guide →

How to apply

Clean it, wipe it on, buff it off.

1

Prepare the surface

  • Clean thoroughly. Remove grease, limescale, old polishes and sealers. The coating bonds to the surface, not to dirt.
  • Finish with an isopropyl alcohol (IPA) wipe and let the surface dry completely.
  • Work in the shade between 5 °C and 35 °C, below 85% relative humidity, with no rain expected for 12 hours.
2

Mix it

Part A
+
Part B
+
IPA or ethanol
=
20 Lready-to-use coating
3

Apply it

  1. 1Combine Part A and Part B and dilute with ethanol or IPA as directed. One unit makes 20 litres of ready-to-use coating.
  2. 2Spray lightly onto a section of about 1 m², or onto the applicator cloth.
  3. 3Wipe in overlapping circles or figure-of-eight passes for full, even coverage. A little goes a long way.
  4. 4After 2–5 minutes, buff off any haze with a clean, dry microfibre cloth.
  5. 5Keep dry and untouched for 1 hour. Full water repellency develops within 24 hours.
  6. 6Check: water should bead on the glass. Re-coat any missed patches.
  1. Buff off haze

    after 2–5 minutes

  2. Keep dry

    for 1 hour

  3. Full repellency

    within 24 hours

See it in action

Questions

About using Glass + Ceramic.

How does Nanoman Glass + Ceramic work?

Nanoman coatings contain specifically modified functional nanoparticles that self-assemble and produce a two-dimensional net matrix on the surface that becomes both hydrophobic (water repellent) and anti-stick. Water simply beads and rolls off the coated surface taking dirt and other impurities with it.

Will Nanoman harm my glass or ceramic surfaces?

Definitely not. In fact, Nanoman products create a protective barrier that will actually strengthen the surface. This barrier is only 50-60 nanometres thick, which is invisible to the human eye. Nanoman is UV resistant, anti-corrosive and has a high resistance to scratches and abrasions.

What is the durability of Nanoman Glass + Ceramic?

This will depend on the condition of the treated surface, however generally the coating will last for 3 to 5 years but will vary depending upon environmental factors.

Is the coating biologically safe?

Nanoman Glass + Ceramic is biologically safe and ecologically beneficial. Notwithstanding this, we recommend the wearing of gloves and that the work area be sufficiently ventilated. Nanoman Glass + Ceramic should not be ingested and in the event of eye contact, washed out immediately in warm water.

Does temperature affect Nanoman Glass + Ceramic?

Nanoman Glass + Ceramic is stable at varying temperatures but is best applied at temperatures above 4°C. Recommended curing times will increase with increased humidity. Nanoman coatings should be stored in a sealed container, away from light, ideally within the temperature range +5 to +25°C. The treated surface will be frost and temperature resistant.

How can I seal large surfaces?

Nanoman Glass + Ceramic is best applied to all surfaces (large or small) by spraying on and then rubbing in with a clean, non-abrasive cloth (Kits have applicator cloths included). Work in small sections at a time and thoroughly rub in the nanocoating as applied until the entire surface has been coated. Do not over apply or use too much product as this is not required. Do not apply a second coat. Avoid applying in wet and windy conditions.

Do I have to mask up surrounding areas?

No, Nanoman Glass + Ceramic will not harm or damage surrounding surfaces like rubber or metal. Any overspray can be simply wiped off with a dry cloth.

Can I apply Nanoman products on surfaces that have been sealed with other products?

Yes, but the surfaces should be pre-cleaned thoroughly using either Nanoman Pre-Cleaner or Methylated Spirits. The surface to be treated has to be clean, completely dry and grease free prior to any application of the nanoman coating.

How do I clean surfaces treated with Nanoman Glass + Ceramic?

Nanoman products are designed to cut your cleaning time significantly and eliminate the need to use aggressive cleaners that are harmful to our environment. We recommend cleaning only with water and wipe down with a soft cloth or towel. Occasionally, you may have to use a mild/ph neutral cleaner to remove the occasional stubborn mark to keep your surface looking like new.

How long does it take for the coatings to set?

Nanoman Glass + Ceramic requires 30 – 60 minutes to cure during which time the surface should remain completely dry and untouched. In more humid conditions, curing time will be longer. After curing, the coated surface should be polished or wiped down with a soft cloth and if necessary with Nanoman Pre Cleaner to remove any remaining silanes or residue. The surface will be at its most effective after 24 hours and should be kept dry during this time if possible.

Also in the range

All products

Trade and bulk supply

Supplied as a concentrate with dilution guidance, so you move and store less volume.