Guides / Fabric Protection

Rug coating for export: what overseas buyers check

Overseas rug buyers are asking more questions about finishes than they used to. A rug that sells well can still be held up at sampling because the buyer’s chemical or quality team wants proof about what it was treated with. Here is what buyers typically check on a rug coating, and how to have the answers ready before they ask.

1. Is the finish PFAS-free?

This is now the first question. Many water- and stain-repellent finishes were fluorinated, and PFAS restrictions on carpets, rugs and textiles in US states, along with retailer policies in Europe and North America, mean buyers want confirmation in writing. A signed PFAS-free statement from your coating supplier answers it directly.

2. Does it actually repel water?

Buyers expect a number, not a claim. The usual check is a spray test, which rates how well a surface sheds water on a scale where 100 is the top score. Nanoman® Fabric + Textile rates 100 in the IS 390 spray test.

3. Does it resist stains, and on which fibre?

Stain results only mean something if the test fibre is relevant. Fabric + Textile was tested on a cream viscose carpet, one of the hardest rug fibres to keep clean. Of 15 everyday stains, 11 left no visible mark when blotted straight away, and 9 still left none after 24 hours, graded on the AATCC Gray Scale.

4. Does it change the product?

A finish that alters colour, handle or lustre creates a quality claim of its own. The coating should be invisible once dry, and your quality team should confirm that on a finished piece before you scale up.

5. How is it applied, and is it consistent?

Buyers want to know the finish is applied the same way on every piece. With Fabric + Textile the method is short enough to write on one page:

  1. Dilute the concentrate 1 : 25 with deionised water.
  2. Spray one even coat with an HVLP gun until the pile is damp. One coat is enough, rugs and carpets included.
  3. Brush it into the pile with a soft brush.
  4. Air-dry fully before rolling and packing.

6. What will it cost per rug?

Your own team will ask this before the buyer does. With a ready-to-use cost of about ₹8 to ₹10 per sq ft treated, plus GST, an 8 × 5 ft rug costs roughly ₹305 to ₹407 to coat. That is usually a small share of the rug’s selling price. Use the cost-per-rug calculator to work it out for your sizes and volumes.

Have the documents ready

The fastest way through a buyer’s review is to send everything at once:

  • PFAS-free statement
  • IS 390 spray test result
  • Stain-resistance test results
  • Technical and safety data sheets
  • Your application method
  • Supply details, including the HS code

We send this set by email to exporters who use Fabric + Textile. Request buyer documents, or read more about how our rug coating works.